Ethernet Communication Parameters (Edit ECT Menu)

Use the Edit ECT menu to display the Ethernet communications parameters.

Transactions menu (DEBIT & CREDIT) > CONFIGURATION menu (press the green OK key) > Setup menu > IP Hosts > Edit ECT

Note: For instructions on navigation through the menus, see The Menu Feature.

IMPORTANT: Do Not Edit the parameters in this menu unless directed by Moneris. Only some of the menu's parameters are listed below. You can ignore all other parameters.

Pri Auth URL

The URL is automatically loaded into this parameter during Initialization.

Pri Auth Port

The port number is automatically loaded into this parameter during Initialization.

Sec Auth URL

The URL is automatically loaded into this parameter during Initialization. This is the same value as Pri Auth URL.

Sec Auth Port

The port number is automatically loaded into this parameter during Initialization. This is the same value as Pri Auth Port.

Pri Sett URL

The URL is automatically loaded into this parameter during Initialization. This is the same value as Pri Auth URL.

Pri Sett Port

The port number is automatically loaded into this parameter during Initialization. This is the same value as Pri Auth Port.

Sec Sett URL

The URL is automatically loaded into this parameter during Initialization. This is the same value as Pri Auth URL.

Sec Sett Port

The port number is automatically loaded into this parameter during Initialization. This is the same value as Pri Auth Port.