Converting the Communications Base Mode

Follow this procedure to ensure that the base is set for contact-based registration.

1. Dock the terminal on the base to which it is being registered.

2. Press the key_admin-r.jpg  key.
The MAIN MENU appears.

3.  Scroll down to CONFIGURATION, and press the key_okay-r.jpg  key.
The CONFIG FUNCS menu appears.

4.  Scroll down to BASE CONFIG, and press the key_okay-r.jpg  key.

If the SWIPE ADMIN CARD prompt appears, swipe your POS Admin card.


5. Press the key_okay-r.jpg  key to select CONVERT BASE.

6. Press the key_okay-r.jpg  key to select CONTACT MODE.

7. When PLEASE WAIT appears, wait while the base is converted.  

8. When CONVERSION SUCCESSFUL PRESS OK appears, press the key_okay-r.jpg key.

9. Press the key_cancel.jpg key three times.

10. When TERMINAL SETUP REQUIRED or the READY screen appears, follow the "Establishing a Connection to the Base" procedure.