- Scroll down: press the
key to move the highlight bar down.- Scroll up: press the
key to move the highlight bar up.- Select a highlighted item: press the
key.For information about the keys...
The terminal communicates with the Moneris Host over a wireless 3G network. This menu allows you to configure the 3G Communication parameters (3G Communication is enabled by default). The parameters are listed in the order they appear on the menu.
|
3G SETUP |
|
|
Configure only if the SIM card installed in your terminal is labelled with the wireless network carrier name "Bell." |
|
|
Do NOT configure unless directed to do so by the Moneris Merchant Service Centre. |
|
|
Do NOT configure unless directed to do so by the Moneris Merchant Service Centre. |
|
|
Do NOT configure unless directed to do so by the Moneris Merchant Service Centre. |
|
|
Do NOT configure unless directed to do so by the Moneris Merchant Service Centre. |
To navigate through the menus:
- Scroll down: press the key to move the highlight bar down.
- Scroll up: press the key to move the highlight bar up.
- Select a highlighted item: press the key.
For information about the keys...
From the TERMINAL SETUP REQUIRED (or REINITIALIZATION REQUIRED) screen:
1. Press the 
key.
The MAIN MENU appears.
2. Scroll down to CONFIGURATION, and press the key.
The CONFIG FUNCS menu appears.
3. Scroll down to 3G CONFIG, and press the key.
The 3G SETUP menu appears.
4. Scroll to APN, and press the key.
5. Scroll down to MONBLPUB (i.e., if BELL SIM Card is installed), and press the key.
The 3G SETUP menu appears.
6. Press the 
key once.
7. When 3G CONNECTED PRESS OK prompt appears, press the key.
The TERMINAL SETUP REQUIRED (or REINITIALIZATION REQUIRED) screen appears.
Go back to Getting Started.