The Gift/Loyalty VOUCHER HEADER Menu

The terminal can be configured to print vouchers on gift/loyalty receipts. Use this menu to set up the gift and loyalty voucher-related messages printed on the gift/loyalty receipts.

The text can be bold, double height and double width., i.e. more than one format can be applied to the voucher text.

VOUCHER HEADER

 

ENABLED

Turn vouchers off or on

Press the key_f1-r.jpg key to select YES, press the key_f3-r.jpg key to select NO.
 

BOLD

print the voucher in bold text

Press the key_f1-r.jpg key to select YES, press the key_f3-r.jpg key to select NO.
 

DOUBLE HEIGHT

print the voucher in text that is 2 lines high

Press the key_f1-r.jpg key to select YES, press the key_f3-r.jpg key to select NO.
 

DOUBLE WIDTH

print the voucher in text that is 2 characters wide

Press the key_f1-r.jpg key to select YES, press the key_f3-r.jpg key to select NO.
 

INITIAL TEXT

If you have changed a pre-programmed voucher header, use this menu item to reset the voucher header to the original pre-programmed text.

Press the key_f1-r.jpg key to select YES, press the key_f3-r.jpg key to select NO.
 

HDR ENGLISH

To use the displayed text, press the key_okay-r.jpg  key.

To change the text, begin keying in the new text ( Entering alphabetic characters and punctuation .) and press the key_okay-r.jpg  key.

HDR FRENCH?

To use the displayed text, press the key_okay-r.jpg  key.

To change the text, begin keying in the new text ( Entering alphabetic characters and punctuation .) and press the key_okay-r.jpg  key.
 

Press the key_cancel.jpg key to return to the gift/loyalty PRINTER CFG menu.

Press the key_cancel.jpg key to return to the gift/loyalty SETUP menu.

 

To navigate through the menus:

- Scroll down: press
the key_f1-r.jpg key to move the highlight bar down.
- Scroll up: press
the key_f3-r.jpg key to move the highlight bar up.
- Select a
highlighted item: press the key_okay-r.jpg  key.

For information about the keys...

To access the Ernex VOUCHER HEADER menu, from the READY screen:

  1. Press the key_admin-r.jpg  key.
    The MAIN MENU appears.

  2. Scroll down to ERNEX and press the key_okay-r.jpg  key.
    The ERNEX menu appears.

  3. Scroll up to SETUP and press the key_okay-r.jpg  key.
    The SETUP menu appears.

  4. Scroll down to PRINTER CONFIG and press the key_okay-r.jpg  key.
    The PRINTER CFG menu appears.

  5. Press the key_okay-r.jpg  key to select VOUCHER HEADER.
    The VOUCHER HEADER menu appears.

Top of page