Enable for RS232 Serial Connection to ECR

From the REINITIALIZATION screen:

To navigate through the menus:

- Scroll down: press
the key_f1-r.jpg key to move the highlight bar down.
- Scroll up: press
the key_f3-r.jpg key to move the highlight bar up.
- Select a
highlighted item: press the key_okay-r.jpg  key.

For information about the keys...

1.  Press the key_admin-r.jpg  key.
The MAIN MENU appears.

2.  Scroll down to CONFIGURATION, and press the key_okay-r.jpg  key.
The CONFIG FUNCS menu appears.

3.  Scroll up to SEMI COMM CFG, and press the key_okay-r.jpg  key.
The SEMI COMM CFG menu appears.

4.  Scroll down to RS232 and press the key_okay-r.jpg  key.

5. Scroll to the appropriate baud rate value, and press the key_okay-r.jpg  key.

6. Wait for the REINITIALIZATION REQUIRED screen to appear.

7. Go back to the overview setup steps (continue at step 6).