Configuring Multi-Terminal Reporting

You must perform this configuration on every terminal you wish to include in the Multi-Terminal Report. This configuration enables Multi-Terminal Reporting and assigns a terminal name to the terminal.

To change a terminal name ...
To remove a terminal name ...

 

Enabling Multi-Terminal Reporting

From the READY screen:

To navigate through the menus:

- Scroll down: press
the key_f1-r.jpg key to move the highlight bar down.
- Scroll up: press
the key_f3-r.jpg key to move the highlight bar up.
- Select a
highlighted item: press the key_okay-r.jpg  key.

For information about the keys...

1. Press the key_admin-r.jpg  key.
The MAIN MENU appears.

2. Scroll down to CONFIGURATION, and press the key_okay-r.jpg  key.
The CONFIG FUNCS menu appears.

3. Scroll down to MULTI TERM CFG, and press the key_okay-r.jpg  key.
The MULTIPLE TERM TRANSACTION? prompt appears.

If the SWIPE ADMIN CARD prompt appears, swipe the POS Admin card.

4. Press the key_f1-r.jpg key to select YES.
The MERCHANT TERMINAL NAME entry screen appears.

5. Key in the terminal name (max. 6 characters) and press the key_okay-r.jpg  key. (Entering Alphabetic Characters)
The ALLOW CLOSE BY ADMIN 99? prompt appears.

6. If you wish to have:

- Two options for closing the batch on this terminal, Multi-terminal Reporting AND Admin 99, press the key_f1-r.jpg key to select YES

- Only one option for closing the batch on this terminal, Multi-terminal Reporting, press the key_f3-r.jpg key to select NO

Note: Multi-terminal Reporting allows you to close batches for a group of terminals from one terminal. Admin 99, the shortcut for Close Batch, allows you to close the batch only for the terminal on which you are performing the Admin 99 function.

The terminal communicates with the Moneris Host then returns to the READY screen.

Disabling Multi-terminal Reporting

Follow steps 1 through 5 above. At step 6, press the key_f3-r.jpg key to select NO. The terminal communicates with the Moneris Host then returns to the READY screen.

The terminal can no longer be closed from another terminal and cannot close other terminals.