The terminal can be configured to print Ernex vouchers on Ernex receipts. Use this menu to set up the Ernex voucher-related messages printed on the Ernex receipts.
The text can be bold, double height and double width., i.e. more than one format can be applied to the voucher text.
|
VOUCHER HEADER |
|
|
ENABLED |
Turn vouchers off or on Press F1 to select YES, press
F3 to select NO. |
|
BOLD |
print the voucher in bold text Press F1 to select YES, press
F3 to select NO. |
|
DOUBLE HEIGHT |
print the voucher in text that is 2 lines high Press F1 to select YES, press
F3 to select NO. |
|
DOUBLE WIDTH |
print the voucher in text that is 2 characters wide Press F1 to select YES, press
F3 to select NO. |
|
INITIAL TEXT |
If you have changed a pre-programmed voucher header, use this menu item to reset the voucher header to the original pre-programmed text. Press F1 to select YES, press
F3 to select NO. |
|
HDR ENGLISH |
To use the displayed text, press OK. To change the text, begin keying in the new text (Entering alphabetic characters and punctuation.) and press OK. |
|
HDR FRENCH? |
To use the displayed text, press OK. To change the text, begin keying in the new text (Entering alphabetic
characters and punctuation.)
and press OK. |
Press Can/Ann to return to the Ernex PRINTER CFG menu.
Press Can/Ann to return to the Ernex SETUP menu.
To
navigate through the menus:
- Scroll down: press F1 to move the highlight
bar down.
- Scroll up: press F3 to
move the highlight
bar up.
- Select a highlighted
item: press OK.
To access the Ernex VOUCHER HEADER menu, from the READY screen:
Press the ADMIN
key.
The MAIN MENU appears.
Scroll down to ERNEX and press OK.
The ERNEX menu appears.
Scroll up to SETUP and press OK.
The SETUP menu appears.
Scroll down to PRINTER CONFIG and press OK.
The PRINTER CFG menu appears.
Press OK to
select VOUCHER HEADER.
The VOUCHER HEADER menu appears.